Net n' Clean

The Net’n’Clean system is composed of a series of nozzles installed at the bottom of the pool (the number of nozzles will depend on the pool size and shape) as well as one or more control valves that direct pressurized water through each nozzle branch sequentially. Water flows out at high pressure through nozzles and causes the dirt at the bottom to rise to the surface of the pool, where it is collected by the filtering system (skimmer or overflow).

Technical Features:

• Fully hydraulic mechanism
• Easy mounting and maintenance
• Six 1 1/2" outlets
• Center Clamp Ring Design - No tools required for maintenance
• Dial Zone - Adjustable knob at top of valve allow you to adjust the amount of time water is to return through each of the six zones.
• Up to a maximum of 5 nozzles allowed per zone.
• All internal component are made from Injection molded plastic.
• All internal axle pins and metal components are made from Salt-resistant titanium.
  

Operating principle
	If the distributor valve sends no pressurized water toward the nozzle, the nozzle remains in its dropped position.
	When water starts to flow toward the nozzle from the valve, the nozzle is raised and a pressurized water jet exits at an angle parellel to the pool floor, thereby eliminating dirt from an area of the pool.
	When the valve switches and starts sending water to another nozzle branch, the raised nozzle drops back into its resting position. Several tracks inside the nozzle ensure that the nozzle rotates slightly every time it goes up and down, such that the hole faces another area of the pool floor.
	Once the distributor valve has performed a full cycle of six changes, it returns to the same nozzle, lifting it again and restarting the cleaning cycle.